NW5 Series Modular Power Quality Power Units

Function and use

NW5 series power quality power units are suitable for power systems with AC 50/60Hz and rated voltage AC690V or less. The product integrates multiple core functions of harmonic control, reactive power compensation, and three-phase unbalance control. It can accurately detect and filter out grid harmonics from 2 to 50 times, with a harmonic compensation rate of more than 95%. It can quickly track changes in load reactive power, increase the power factor to more than 0.99, and effectively balance three-phase currents, completely solving the problem of power pollution caused by nonlinear loads.

Detailed description

Parameters:
Rated voltage: 220V/400V/480V/690V
Noise index: ≤65dB
Full response time: ≤10ms
Communication interface: RS485

Advantages/core functions:
01 Flexible adjustment
SVG, APF Both have reactive power compensation, harmonic control, and three-phase unbalance control capabilities. The priority can be set independently, and the management function is more powerful. The compensation function can be flexibly adjusted according to the site conditions
02 The product performance is better
The overall machine efficiency is up to 97.5%, the product performance is better, and the use is more energy-saving. Under full power operation, the annual power loss of a single module can be reduced by up to 4000+kwh
03 Multi-scenario adaptation
A variety of voltage specifications (220~690V) optional; two frequencies (50/60Hz) adaptation, more optional specifications, adaptable to more application scenarios

Detailed parameters

Parameter table 1

< tr>< /tr>

Parameter classification	Parameter item	Parameter value
System Parameters	Product model	NW5APF
	Rated input line voltage	220V (-20%~+20%), 400 V(-40%~+20%), 480V(-20%~+15%), 690V(-30%~+15%)
	Power grid frequency	50Hz (±5% )
	Overall efficiency	≥97%
	Current transformer	Secondary rated current 5A
	CT Wiring method	Load side, source side
	Circuit topology	Three-level
Performance indicators	Phase rated compensation capacity	220V/400V: 50/75/100/150A 480V/690V: 50/100A
	Reactive power compensation	Support
	Harmonic elimination	Support
	Three-phase unbalanced management	Support
	Filter range	2~50 Times
	Filtering times selection	2~50 Times
	Filter compensation rate	≥95%
	Full response time	10ms
	Control algorithm	Intelligent FFT, instantaneous reactive power
	Cooling method	Intelligent air cooling (automatic fan speed adjustment)
	Noise index	≈65dB (environmental noise 40dB, 1m away from the product) , single product noise)
Communication	Communication interface	RS485
	Communication protocol	Modbus
Protection function	System voltage overvoltage and undervoltage protection	Supported
	Compensated output overcurrent protection	Supported
	Compensated output overcurrent protection	Supported
	Over-temperature protection	Supported
	DC bus overvoltage and undervoltage protection	Supported
	Control system failure	Supported
	Main circuit device damage protection	Supported
	Automatic detection of voltage and current phase sequence	Supported
	Fault record	Supported 500 Strip
Installation	Installation method	Rack-mounted/wall-mounted
	Ventilation volume of a single product	220V/400V/480V: 1 50A:8.80m³/min; 100A/75A:9.54m³/min; 50A:10.2m³/min 690V: 50A/100A: 19.2m³/min

Parameter table 2

Parameter classification	Parameter item	Parameter value
System parameter	Product model	NW5SVG
	Rated input line voltage	220V(-20%~+20%), 400V(-4 0%~+20%), 480V(-20%~+15%), 690V(-30%~+15%)
	Grid frequency	50Hz/60Hz (±2% )
	Overall efficiency	≥97.5%
	Current transformer	Secondary rated current 5A
	CT Wiring method	Load side, power side
	Circuit topology	Three-level
Performance index	Phase line rated compensation capacity< /td>	220V/400V: 50kvar, 100kvar 480V/690V: 80kvar, 120kvar
	Number of filters	2~13 Times
	Three-phase unbalance management	Support
	Full response time	5ms
	Target power factor	-1~+1 Adjustable
	Control algorithm	Intelligent FFT, instantaneous reactive power algorithm
	Cooling method	Intelligent air cooling (automatic fan speed adjustment)
	Noise index	≈65dB (environmental noise ≤40dB, 1m away from the product) , single product noise)
Communication	Communication interface	RS485
	Communication protocol	Modbus
Protection function	System voltage overvoltage and undervoltage protection	Support
	Compensation output automatic current limit	Support
	Compensation output over-current protection	Supported
	Over-temperature protection	Supported
	DC side overvoltage and undervoltage protection	Support
	Control system failure	Support
	Main circuit device damage protection	Support
Automatic detection of voltage and current phase sequence	Supported
	Fault record	Supported
Installation	Installation method	Rack-mounted/wall-mounted