Function and Usage
The YBLX-X2 series limit switch is suitable for use as a travel control and limit switch in AC control circuits with a frequency of 50Hz and a voltage of 220V. It complies with the standards: GB/T 14048.5, IEC 60947-5-1.
Detailed Parameters
| Parameter Category | Parameter Item | Parameter Value |
|---|
| Protection Level | | IP50 |
| Rated Heat Dissipation Current | | 10A |
| Rated Voltage | AC-15: | 220V |
| Rated Current | AC-15: | 2A |
| Number of Normally Open Contacts | | 2 pairs |
| Number of Normally Closed Contacts | | 2 pairs |
| Altitude | | ≤ 2000m |
| Environmental Temperature | | -5℃ → +40℃ |
| Relative Humidity | At a maximum temperature of +40℃, the relative humidity of the air shall not exceed 50%. At lower temperatures, higher relative humidity is allowed, for example, at 20℃, the humidity can reach 90%. Special measures should be taken for occasional condensation caused by temperature changes. | |
| Rated Insulation Voltage | | 250V |
| Rated Impulse Withstand Voltage | | 2.5kV |
| Installation Category | | II |
| Pollution Level | | 3rd Level |
| Installation Conditions | | Install in a place without significant vibration and impact |
| Parameter Category | Parameter Item | Parameter Value |
| Action Characteristics | Model | YBLX-X2 |
| | YBLX-X2/N |
| Actuation Force (OF) Maximum (max) | ≤ 16N |
| Actuation Stroke (PT) Maximum (max) | ≤ 8mm |
| Total Stroke (TT) | 9mm |
| | 8mm |
