Function and Application
The YBLT-JDK series foot switch is suitable for control circuits with AC 50Hz or 60Hz, voltage 380V, and DC voltage 220V, used to control machine tools and other equipment. Conforms to the standards: GB/T 14048.5, IEC 60947-5-1.
Detailed Parameters
| Parameter Category | Parameter Item | Parameter Value |
|---|
| Rated Voltage | AC-15: 380V, DC-15: 220V | |
| Rated Current: AC-15: 0.79A, DC-13: 0.27A | |
| Rated Heating Current: 5A | |
| Switch Element: YBLX-3/11K | |
| Housing Material: Cast Aluminum Alloy | |
| Protection Level: IP31 | |
| Rated Insulation Voltage | | 415V |
| Rated Impulse Withstand Voltage | | 4kV |
| Installation Category | | II |
| Pollution Degree | | 3rd Grade |
| Operation Frequency | | 20 times per minute |
| Environmental Temperature | | -5℃~+40℃ |
| Relative Humidity | At a maximum temperature of +40℃, the relative humidity of the air shall not exceed 50%. At lower temperatures, higher relative humidity is allowed, for example, at 20℃, the humidity can reach 90%. Special measures should be taken for occasional condensation caused by temperature changes. | |
| Elevation Height | | ≤2000m |
| Installation Conditions | | Install in a place without significant vibration and impact |
| Parameter Category | Parameter Item | Parameter Value |
| YBLT-JDK/11 | | |
| 95max | |
| 60 | |
| 185max | |
| 68max | |
| 8 | |
