Function and Use
The YBLT-EKW/5A/B foot switch is suitable for control circuits with AC 50Hz or 60Hz, 220V voltage, and DC 220V; it is used to control machine tools and other equipment. Complies with the standards: GB/T 14048.5, IEC 60947-5-1.
Detailed Parameters
| Parameter Category | Parameter Item | Parameter Value |
|---|
| Rated Parameters | Rated Voltage | AC-15: 220V; DC-13: 220V |
| Rated Current | AC-15: 0.8A; DC-13: 0.16A |
| Agreed Heating Current | 5A |
| Switch Component | YBLX-19/K |
| Housing Material | Cast Aluminum Alloy |
| Protection Level | IP20 |
| Technical Performance | Rated Insulation Voltage | 250V |
| Rated Impact Withstand Voltage | 2.5kV |
| Installation Category | Ⅱ |
| Pollution Degree | 3rd Level |
| Operation Frequency | 20 times/minute |
| Environmental Temperature | -5℃～+40℃ |
| Relative Humidity | At the highest temperature of +40℃, the air's relative humidity shall not exceed 50%. At lower temperatures, higher relative humidity is allowed, for example, at 20℃, humidity can reach 90%. Special measures should be taken for occasional condensation caused by temperature changes. |
| Altitude | ≤2000m |
| Installation Conditions | Install in a place without significant vibration and impact vibration |
| Product Model | | YBLT-EKW/5A/B |
